Equipment, technologies and services for the environment
LAMY LES CONSTRUCTEURSThe bucket is constructed with rigid fold on the upper part and at its base and boxed by a plate of 150x10 across the width.The opening of the jaw is adjustable.Building available from 1.70m to 2.60m. FlatLink) Grapples available: GR: Grapple flanged flat teeth (x7) GR.K: The same as forgings electro-forged, 35mm lg 680mm (x7) GRL.S:GRL.S.2E: Grapple flat teeth welded thickness 20mm with 2 blanks connecting the teeth to each otherMRK: Jaw fingers electro- Forged 35mm lg 680mm, mounted with anti-swivel ring (x7) MRK.D: Jaw of electro-forged fingers 35mm lg 680mm (x12)
R-Series Multifunction BodyFree quote+
LAMY LES CONSTRUCTEURSTipper available from 1,70m to 2,60m.Flat bottom with central inner reinforcement. Grapples available: GRL.S: Flanged teeth welded ep. 20mmGRL.S2E: Welded flat cut teeth ep. 20mm with 2 blanks connecting the teeth between them. Possibility of flush or flush teeth.GRL.S.2E.2P: The same with the two-part grab (for passage of the central rod on the loaders) MRK: Electroforged fingers 35mm lg.680mm, mounted with anti-pivoting rings (X7) MRK.D: Jaw of disilage, the same as variant 12 fingers for better distillation (x12)
Skid Steer LoaderFree quote+
LAMY LES CONSTRUCTEURSAvailable in widths from 1,50m to 2,50m.Body built on a high resistance structure in round steel irons of 25mm diameter, spaced 60mm.Spacing 45 mm for round irons with diameter 25 mm.Spacing 85 mm for Irons round diameter 30 mm.Lame in 250x30mm.OPTIONS : Counter-Blade Bolted 250x30mm / Teeth with blade in 150x20mm
Claire-Voie DumpsterFree quote+
LAMY LES CONSTRUCTEURSLarge capacity bucket reinforced by a central rib and an outer bottom belt. Possibility of handling bulk density. Choice of cheek patterns; Straight or raised rounded cheeks; The add-ons increase the capacity but are not included in the capacity.Benne equipped with counter-blade bolted 150x20mm. Diversified range with widths between 2.00m and 5.00m and volumes from 500L to 6000L.OPTIONS: Raised cheeks RoundedSteel protection ringsReversible bolted counter-blade
Cereal tipping trailerFree quote+
LAMY LES CONSTRUCTEURSFork made on the basis of 2 plates in profile FEM II or III receiving forks. The jaw supports are in flat iron of 20 mm and the upper part of the fork is in solid round of diameter 80mm. The hoses are protected by a 6 mm thick sheet metal housing and a lower 8 mm sheet metal box reinforces the frame. This fork can work in the most extreme conditions. Available from 1,70m to 2,80m. Double-effect cylinders 70X40mm, stroke 220mm.Wearing rings with grease.OPTION:Grapple 2 parts.
Lamy Hydro-Claw Forks Series ManufacturersFree quote+
LAMY LES CONSTRUCTEURSReinforced dumpster TP (BR.TP)Available from 2,00m to 2,60m with a capacity of 500L to 3300L. A blade of attack is available in 250x30mm or 150x20mm according to machine.Blindage in flat under and on the width of the Reinforced bolted or welded tines Bolted or welded tines Reinforced reinforced grab Reinforced Tipping BoxTP (BC.RTP) Tipper designed to work in The most extreme conditions.Available from 2.00m to 3.00m with a capacity of 500L to 3300L.Standard blade available in 250x30mm or 150x20mm according to machine.Structure high strength, outer axial strapping, inner center rib.Plat protection Underneath and over the width of the bucket.…
Reinforced dumpster TPFree quote+
LAMY LES CONSTRUCTEURSThis bucket is specially designed for intense and severe use. Available from 1,70m to 2,80m. Grapple opening adjustment: max. Closing / total clearance along a wall. Single or double snap fastener reinforced. Double-effect cylinders 70x40mm, stroke 220mm. Reinforcement box On bottom.Cainting and inner center rib.OPTIONS: -Against Bolt Blade -Bolted Cheeks.-Grapples 2 parts.
Multi-Functional Tipper Special WasteFree quote+
LAMY LES CONSTRUCTEURSHeavy-duty and large-capacity modelWidth from 1.70m to 2.60mFormed bend, rigid bend on the width, boxed underneath Adjustable 2-position clamp with 2 double-acting cylinders 70x40 Bichromated Ø 35mm axles with grease fittingsBase supports in the single bucket Or doubleThis longevity and its attractive price: an essential asset for your operation Available in several grapples.
Special Purpose Bin Multi-Function R SeriesFree quote+
LAMY LES CONSTRUCTEURSThe front mast bucket (MF)The Mast Frontal bucket allows the user of the mast carriage to dig and dig the bucket, it is particularly appreciated for the recovery of bulk.There are two types of buckets:BF 1V ( 1 cylinder)BF 2V (2 cylinders)The assembly is made of 8 mm thick sheet metal, with an upper stiffening box, a central reinforcing rib in 8 mm and a front blade of 150x20.Disponible from 1.00 m to 3m.Content from 280L to 2800L.OPTIONS : Reversible bolted counter-blade / Anti-protrusion protection ringsFORMS FROM 80 TO 140 HP
Bucket with Frontal MastFree quote+
LAMY LES CONSTRUCTEURSNew Log Clamp adaptable to chargers from 100 to 200 HP. Made of E36 steel, it has two cylinders with hydraulic shock absorbers. The Clamp has mechanical stops in opening and closing. Ideal for intensive work, it will meet your expectations !!
LAMY LES CONSTRUCTEURSThe Claw-Wood is adaptable on Apron Forks, the clamps are made of sheet of thickness 15mm, the opening of the clamp can go up to 2.24m this one is modulable thanks to 3-position adjusting pins. The Claw is suitable for wearing logs, logs and logs. The assembly is done on FEM apron.
LAMY LES CONSTRUCTEURSFork manufactured on the basis of a box with 8mm sheet, including 160x80x6 bushes to accommodate fingers of diameter 45 mm in length 1040 mm.Adjustable jaw opening, 12 mm jaw support with 18 mm bars on Sides, 6 mm sheet metal hose protection box. Available from 1.70 m to 2.80 mOptions:-Different types of fingers adaptable (mangano fingers of diameter 45, electroforged fingers of diameter 35, ...).