Lamy Hydro-Claw Forks Series Manufacturers


Lamy Hydro-Claw Forks Series Manufacturers
Description :

Fork made on the basis of 2 plates in profile FEM II or III receiving forks.

The jaw supports are in flat iron of 20 mm and the upper part of the fork is in solid round of diameter 80mm. The hoses are protected by a 6 mm thick sheet metal housing and a lower 8 mm sheet metal box reinforces the frame. This fork can work in the most extreme conditions.

Available from 1,70m to 2,80m. Double-effect cylinders 70X40mm, stroke 220mm.

Wearing rings with grease.


Grapple 2 parts.

Searches related toWaste handling

Grouped quotes (0)